Power Save Function - Icom MR-1210RII Instruction Manual

■ Power save function

The power save function conserves the boat's bat-
tery power by pausing the transmission. The standby
(pausing) times are selectable (rotation number is
fixed to 10).
For example, when 1 minute is selected, the scanner
rotates 10 revolutions; then stops for 1 minute, and
then repeats this sequence while the power save func-
tion is activated.
D Setting the scanning standby time
q Push [MENU]/[ ], and then push [t] or [u] to
select the System menu.
w Push [p] or [q] to select the "Save Time" item.
e Push [ENTER]/[ ] to enter the option selection
mode.
r Push [p] or [q] to select the standby time.
• 1, 6, 15, and 30 minutes are selectable.
t Push [ENTER]/[ ] to save the setting.
y Push [MENU]/[ ] to exit the Menu screen.
D Using the power save function
q Hold down [TX (SAVE)]/[
turn ON the power save function.
• The save indicator is displayed in the upper right of the
screen.
w After the scanning rotations are finished, transmis-
sion and rotation are suspended until the selected
standby time elapses.
• "SAVE" and standby time appear in the upper right of the
screen and the standby time is counted down.
e After the selected standby time elapses, transmis-
sion and rotation restart.
r Push [TX (SAVE)]/[
save function.
• The save indicator turns OFF.
NOTE: When you use the Power save function to-
gether with the Alarm function, the LCD display is
turned OFF until an object enters the programmed
alarm zone, therefore, more power saving is possible.
(p. 29)
] for 1 second to
] to cancel the power
(MENU > System > Save Time)
Scan and Standby modes alternate
BASIC OPERATION
Count down
the standby
time
3
22