Table of Contents
Advertisement
Information system
Driver information system
Display in the instrument cluster
Fig. 37 Display types: MAXI DOT/Segment Display
Depending on the vehicle's equipment, the information system uses the dis-
play in the instrument cluster to provide the following information
Time / symbols of the Infotainment voice control
1
Engaged gear / gear recommendation
2
Selector lever positions for the automatic gearbox
Warning lights of the START-STOP system
Compass display
Detected traffic signs
Driving data (multifunction display)
3
Warning lights
Information messages
Door alarm
Eco tips
Service interval display
Outside temperature
4
Cruise control / speed limiter
5
Total distance travelled
Distance travelled by resetting the memory (trip)
6
Time
7
Warning lights of the START-STOP system
8
Engaged gear / gear recommendation
Selector lever positions for the automatic gearbox
Outside temperature
9
Warning lights
Driving data (multifunction display)
Total distance travelled
10
Distance travelled by resetting the memory (trip)
Cruise control / speed limiter
Service interval display
Information messages
Door, luggage compartment and bonnet alarm
When the door or luggage compartment / bonnet is open, a graphic warning
appears in the display.
An acoustic signal will also sound if you drive the vehicle above 6 km/h when a
door is open.
Reset counter for distance travelled (trip)
» Fig.
37.
The counter can be reset by tapping the button
Infotainment via the menu
Setting the time
The time can be adjusted in Infotainment via the menu
or by pressing the button in the instrument cluster.
Set the time using the button in the instrument cluster
›
Switch on the ignition.
›
Press and hold the button
›
Release the button
» Fig. 38
A
/ → → Instrument cluster.
Fig. 38
Button in the instrument cluster
A
» Fig.
38until thetime is shown in the display.
and the system switches to the hour setting function.
A
Information system
on page 49 or in
→ → Time and date
49
Advertisement
Table of Contents
