Table of Contents
Advertisement
Operation principle
In the voice control main menu
» Fig. 172
commands for the individual menus.
Other voice commands are displayed by tapping the respective function sur-
face, if required, by issuing the name of respective command (e.g. navigation).
The screen shows the following
Context-dependent:
A
▶
The system is waiting for a voice command
▶
The system recognises a voice command
The system plays a message
▶
Voice command entry was stopped
▶
Available list entries
B
Possible voice commands
C
Display other possible voice commands
Voice commands that can be issued, are indicated in "quotation marks".
Note
The display of the voice control symbols
equipment fitted also on the display of the instrument cluster.
130
Infotainment
Fig. 173
Example of screen display
on page 129 There are basic voice
» Fig.
173.
» Fig. 173
are dependent of the
A
Voice commands
Enter
The voice commands must only be issued when the
on the Infotainment screen and the input tone has completely faded. The in-
put tone can be switched on / off. To do so, tap the
the function surface → Voice control.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be acknowledged by tap-
ping the
sensor field (does not apply to Infotainment Columbus) or press-
ing the button on the multifunction steering wheel. Then a voice command
can be issued. The voice control is hereby much faster.
Stop
This allows for more time for input of the voice command (e.g. in the list of
visited contacts).
The process for the voice command input can be stopped by moving a finger
up/down across the screen or by turning the controller (not applicable to In-
fotainment Columbus).
When stopping, the symbol changes from
Restore
The procedure for voice command input can be restarted in one of the follow-
ing ways.
▶
By tapping on the function surface .
▶
By tapping the
sensor field on the Infotainment (does not apply to Info-
tainment Columbus).
By pressing the key on the multifunction steering wheel.
▶
Not recognising a voice command
If a voice command is not detected three times in succession from Infotain-
ment, then the voice control is stopped.
Correction of a voice command input
A voice command can be corrected, modified or re-entered by tapping the
sensor field (does not apply to Infotainment Columbus) or pressing the
button on the multifunction steering wheel. However, this is only possible
as long as the
symbol appears on the screen.
You do not have to wait until the voice command is recognised by Infotain-
ment.
symbol is displayed
sensor field and then
to .
Advertisement
Table of Contents
