Store the waypoint tour on the SD card
Delete the waypoint tour
Rename the waypoint tour
Display the waypoint tour
» Fig. 233
Import waypoint tour from the SD card
▶
In the Waypoint mode main menu, tap on the function surface → Waypoint
→ Import.
▶
Select the source of the waypoint tour recording and confirm the import.
Traffic reports
List of traffic reports
The Infotainment systems enables the reception of traffic reports, which in-
clude information regarding traffic congestion, using TMC (Traffic Message
Channel) or online (when Infotainment Online
›
To display the list of traffic reports, tap on the
the function surface .
In the list of traffic messages and the map, a max. of 6 messages are displayed,
that are provided with a letter and a traffic obstruction symbol (e.g. , , )
» Fig.
234.
A
At present on the route traffic information is taken by using a nav. announce-
ment.
Source of Traffic Information
On the position
» Fig. 234
can the following symbols are displayed.
C
on page 194
Fig. 234
List of traffic reports
» page 14
services are activated).
sensor field and then tap
TMC Traffic Information (with strikethrough icon, the Infotainment is out
of range of any traffic information provider)
Online traffic information
Display options
Route guidance is disabled - All traffic messages are displayed.
▶
▶
Route guidance is taking place - After tapping function surface
» Fig. 234
in the displayed menu, you can select all traffic messages by tap-
ping the function surface All areas, or you can select only the traffic messages
present on the route by tapping the function surface Route.
A traffic report may contain some of the following information.
Symbol of the traffic obstruction
▶
▶
Number of road affected
▶
Name of the location affected
▶
Description of the traffic obstruction
Distinguish the importance of a TMC message traffic obstruction using
colour
The symbol for traffic obstruction (e.g. , , ) precedes the obstruction and
the length of the obstruction is shown in the map on the right along the route.
Depending on the context, the symbol for the obstruction is displayed in one
of the following ways.
No route guidance is taking place
Red - All traffic obstructions
▶
Route guidance is not taking place
▶
Grey - The traffic obstruction is not on the route
▶
Red - The traffic obstruction is on the route, the route will not be recalcula-
ted and the route passes through the traffic obstruction
Orange - The traffic obstruction is on the route, the route is recalculated and
▶
an alternative route is available
Distinguish the importance of a TMC message traffic obstruction using
colour
The colour differentiation of traffic conditions on the provider of the online
traffic reports depends.
To change the map orientation, go to the Navigation main menu and tap on
function surface → Map → Traffic flow settings.
B
195
Navigation