Table of Contents
Advertisement
Change bulb for fog lights switch - Variant 1
Fig. 359 Remove the fog lamp / bulb change - variant 1
Read and observe
and
Remove the protective grille and headlight
›
Insert the clamps for removing the full wheel trims into opening
» Fig.
359.
›
By pulling the hook in direction of arrow
the direction of arrow
.
2
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
Carefully move the headlights in the direction of arrow
direction of arrow
.
4
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Turn the holder with the bulb to the stop in the direction of the arrow
›
Remove the holder with the bulb in the direction of arrow
›
Insert a new holder with the bulb in the headlamp and turn it in the direction
of arrow
as far as the stop.
7
on page 299 first.
, remove the protective grille in
1
3
and remove in the
.
5
.
6
.
8
›
Fit the connector.
Refit the headlight and grille
›
Insert the fog light opposite to the direction of arrow
posite to the direction of arrow
›
Insert the guard and push it gently until it locks into place.
Change bulb for fog lights switch - Variant 2
A
Fig. 360 Remove the fog lamp / bulb change - variant 2
Read and observe
Remove the cover and headlight
›
Insert the clamps for removing the full wheel trims into opening
» Fig.
360.
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
›
Raise the headlights in the direction of arrow
.
7
direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
and bolt into place.
3
and
on page 299 first.
with the screwdriver from the tool kit.
B
and remove carefully in the
2
.
3
Fuses and light bulbs
» Fig.
359, push op-
4
A
.
1
.
4
301
Advertisement
Table of Contents
