Table of Contents
Advertisement
Image with GPS coordinates
Infotainment enables guidance to the GPScoordinate data stored in the image.
›
Tap the
sensor field and then the function surface Images.
›
Select the connected source and open the image with GPS coordinates.
›
Tap the function surface
» Fig. 219
the option to start route guidance.
The image can be obtained from an external device in which GPS coordinates
were stored at the time of image creation. It is also possible to create and im-
port this in the application "MyDestination"
Map
Options for map display
›
In the Navigation main menu, tap on function surface .
The following function surfaces are displayed
2D - Two-dimensional map display
3D - Three-dimensional map display
Fig. 219
Image with GPS coordinates
in the image and a menu will open with
» Fig. 217
on page 183.
Fig. 220
Map options
» Fig.
220.
Display of the route from the current vehicle location to the destination
Presentation of the destination or the next interim destination in the map
(depending on the menu item setting) → Advanced settings → Status line:)
Automatic map display in day or night mode (depending on the currently
A
active vehicle lighting)
Daytime map display
B
Night-time map display
C
Turns the split screen display on / off
D
cles with the infotainment Amundsen when the map is displayed in the
digital instrument cluster)
Switch the display of selected POI categories on/off
E
a destination via the map point
Switch the display of Google Earth
F
If the map scale of the 2D Map or 3D Map is greater than 10 km, then the map
is automatically displayed as 2D and aligned in the direction of north. If the
scale is increased beyond this value, then the map is switched back to the orig-
inal representation.
Map scale
» page 177
(does not apply to vehi-
» page
180, Entering
™
online map on/off
» page 178
Fig. 221
Function surfaces for
changing the map scale:
Infotainment Columbus
Navigation
185
Advertisement
Table of Contents
