Table of Contents
Advertisement
Do not connect bulbs with neon tubes in the socket - there is a risk of dam-
■
aging the lamp.
For appliances with an independent power source (e.g. such as notebooks),
■
first connect the power source itself and only after that connect the appliance.
Ashtray and cigarette lighter
Introduction
The ashtray can be used for ash, cigarettes, cigars and the like
WARNING
Never place hot or flammable objects in the ashtray – risk of fire!
Ashtray
Fig. 114 Remove / open / disassemble ashtray
Fig. 115
Removing the rear ashtray in-
sert
Read and observe
on page 99 first.
Removable ashtray
›
Remove the ashtray in the direction of the arrow
takes place in reverse order.
›
To open the ashtray, turn the cover in the direction of arrow
takes place in reverse order.
›
To disassemble turn the entire cover in the direction
move in direction of arrow
. Assembling takes place in reverse order.
2
Ashtray with removable insert
›
To remove the insert, open the ashtray fully, hold the insert in area
remove in the direction of the arrow
Insertion takes place in reverse order.
Cigarette lighter
Read and observe
on page 99 first.
›
To use the lighter, push it in as far as the stop and wait until the glowing
lighter clicks out again
» Fig.
116.
›
Take out the glowing lighter instantly, use it and insert it back into the sock-
et.
WARNING
The cigarette lighter also works if the ignition is switched off. When leav-
■
ing the vehicle, never leave people who are not completely independent,
such as children, unattended in the vehicle - there is a risk of burning, fire or
damage to the vehicle interior.
Be careful when using the cigarette lighter - it can cause burns.
■
» Fig.
114. Insertion
A
. Closing
B
until it stops and re-
1
C
» Fig.
115.
Fig. 116
Cigarette lighter
Practical features
and
99
Advertisement
Table of Contents
