Table of Contents
Advertisement
Date: - Date settings
■
Date format: - Sets the date format
■
Setting the Infotainment language
›
Tap the
sensor field and then the function surface → Language.
›
Select the Infotainment language.
In some languages, after selecting the function surfaceFemale and Male are dis-
played for the choice of voice prompts for Infotainment.
Note
When a language is selected which does not support voice control, Infotain-
■
ment will indicate this with a message on the screen.
The messages are generated by Infotainment. Flawless clarity (e.g. road or
■
city name) cannot always be guaranteed.
Additional keypad language settings
›
Tap the
sensor field and then the function surface → More keypad lan-
guages.
In this menu, a keyboard language set can be added to allow characters other
than those in the currently selected language to be entered.
Unit settings
›
Tap the
sensor field and then the function surface → Units.
Distance: - Distance units
■
Speed: - Speed units
■
Temperature: - Temperature units
■
Volume: - Volume units
■
Fuel consumption: - Consumption units
■
■
CNG consumption: - CNG consumption units
Pressure: - pressure units for tyre pressure
■
Settings for data transfer
Activated data transfer enables data transfer between the Infotainment sys-
tem and the external device or the operation of some Infotainment functions
using the applications of the external device (e.g. ŠKODA Media Command).
›
Tap the
sensor field and then the function surface → Mobile device data
transfer.
Activate data transfer for ŠKODA apps- Turning data transfer on and off
■
Use apps to operate:: - Setting Infotainment operation via the applications of the
■
external device (applies to Infotainment Columbus, Amundsen)
Deactivate - Deactivation of Infotainment operation via an external device
■
Confirm - Infotainment operation with required confirmation
■
Allow - Infotainment operation without required confirmation
■
Voice control settings
›
Tap the
sensor field and then the function surface → Voice control.
Example commands (infotainment system) - Turn on/off display of the menu con-
■
taining basic voice commands when voice control is activated
Voice control session start tone - Switch on/off the audible signal when turning on
■
the voice control
Voice control session end tone - Switch on/off the audible signal when voice con-
■
trol ends
Input tone in voice dialogue - Switch on/off the audible signal for the voice input
■
End tone in voice dialogue - Switch on/off the audible signal for the voice input
■
Safe removal of the external device
›
Tap the
sensor field and then the function surface → Remove safely: and
select the external device to be removed.
Reset to factory settings
›
Tap the
sensor field and then the function surface → Factory settings.
In this menu, all or only chosen settings can be restored.
®
Bluetooth
Settings
›
Tap the
sensor field and then the function surface → Bluetooth.
Bluetooth - Switch on/off Bluetooth
■
Visibility: - Switch the visibility of the Bluetooth
■
on/off
Name: - Change the name of the Bluetooth
■
Paired devices - Display the list of paired Bluetooth
■
Infotainment settings - Columbus, Amundsen, Bolero
®
function
®
device for Bluetooth
®
unit
®
devices
®
devices
133
Advertisement
Table of Contents
