Adjust the temperature for the left side (or for both sides)
E
Reduce the
temperature/
▶
Adjust the temperature for the right side (or for both sides)
F
Reduce the
temperature/
▶
Depending on equipment fitted:
G
▶
Auxiliary heating and ventilation on / switch off
▶
Switch the Climatronic system off
Interior temperature sensor
H
Switch recirculation on/off
» page 116
Intense air flow to the windscreen on / off (when switching on, the air
flow to the windows and is also switched on)
Switch the rear window heating on/off
Switch the windscreen heating on/off
Setting Climatronic in Infotainment (also operate with some functions)
Synchronise the temperature inside the entire vehicle according to the
temperature setting on the driver's side
Switch automatic mode on
Switch the cooling system on/off
If the function is switched on, a warning light lights up within or below the but-
ton.
Adjust temperature
The temperature can be set on the Climatronic control unit or in Infotain-
ment» page
115. In the range between 16 ° C to 29.5 ° C, an automatic tem-
perature control takes place.
At a temperature setting below 16 °C, lights up in the temperature display,
the Climatronic functions with maximum cooling performance.
At a temperature setting above 29.5 °C, lights up in the temperature display,
the Climatronic functions with maximum heating output.
CAUTION
Do not cover the interior temperature sensor
the Climatronic could be affected.
1)
Applies to left-hand drive vehicles.
2)
Applies to right-hand drive vehicles.
1)
Increase the temperature
2)
Increase the temperature
» page 118
» page 78
» page 78
» page 116
» Fig. 150
- the function of
H
Note
In order to ensure adequate thermal comfort, there may be an increase in en-
■
gine idle speed during operation of the Climatronic in some circumstances.
The setting of the Climatronic is stored in the active user account personali-
■
sation
» page
57.
Operate Climatronic in Infotainment
Read and observe
on page 113 first.
›
To display the main menu, press the button on the Climatronic control
unit.
Function surfaces and screen display
Displays the current operation mode (or set the operation mode) of
A
the Climatronic
Set the desired temperature, front - left side
B
Set the desired temperature, front - right side
C
Setting the power in operation
D
Switching on/off and adjusting the fan speed, cooling system, air dis-
E
tribution and air recirculation
Colour representation of the air flow from the air vents at the front
(Blue colour - temperature reduction / red colour - temperature in-
crease)
Switching on/off the Climatronic
Fig. 151
Infotainment: example display of
the main Climatronic menu
» Fig.
151.
a)
Heating and ventilation
115