Description
Fig. 297 Carrier for the towing device/tow bar/key versions
Read and observe
on page 250 first.
The tow bar is detachable and is located in the storage compartment for the
spare/emergency wheel.
Towing device carrier, tow bar and key versions (dependent on equipment)
» Fig. 297
1
13-pin power socket
Safety eye
2
Mounting recess
3
Cap
4
Dust cap
5
Ball rod
6
Operating lever
7
Lock cap
8
Trigger pin
9
Lock
10
Locking ball
11
Key – Version 1
12
Key – Version 2
13
Adjusting the ready position
Fig. 298 1st step: key version 1/key version 2
Read and observe
on page 250 first.
The tow bar can only be fitted if it is in the ready position.
1st step - applies to key version 1
›
Remove the cap from the lock
›
Insert key
into the lock so that the green marking is pointing upwards.
A
›
Turn key
in the direction of arrow
A
upwards
» Fig.
298.
1st step - applies to key version 2
›
Remove the cap from the lock
›
Insert key
into the lock so that the eye of the key is pointing downwards.
B
›
Turn the key in the direction of arrow
shows up
» Fig.
298.
Fig. 299
2nd step: both key versions
so that the red marking is pointing
1
so that the conclusions release
B 2
Towing device and trailer
251