Table of Contents
Advertisement
Switch the temperature synchronisation on/off throughout the entire
interior of the vehicle according to the temperature setting on the
driver's side
a)
Switch Air Care function on/off
Set the auxiliary heater and ventilation
Switch the windscreen heating on/off
Turn the steering wheel heating on/off
Other Climatronic settings
a)
When function is switched on, the symbol in the function surface is green.
Other Climatronic settings
Press the button on the Climatronic control panel → tap the function sur-
face on the Infotainment screen.
AC profile - Setting the operating performance mode (applies to the Info-
■
tainment Swing)
Automatic air recirculation - Automatic re-circulated air mode on/off
■
Automatic auxiliary heater - Quick interior heating on/off
■
Automatic windscreen heating - Activates/deactivates the automatic windscreen
■
heating
Climatronic - automatic operation
Read and observe
on page 113 first.
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
›
To turn on, press the
» Fig. 150
›
To turn off, press any button for the air distribution or change the blower
speed. The temperature regulation is continued.
Holding the button will turn on automatically.
Operating modes
Automatic mode works in three modes - moderate, medium, and intensive.
Setting the different modes is carried out via the function surface
on page 115.
After the automatic mode is switched on, Climatronic works in the last selec-
ted mode. The currently selected mode is displayed on the Infotainment
screen.
116
Operation
a)
a)
on page 114 button.
» Fig. 151
D
Air distribution control
Read and observe
on page 113 first.
The recirculation mode prevents contaminated outside air getting into the In-
terior of the vehicle. In recirculated air mode air is sucked out of the interior of
the vehicle and then fed back into the interior.
›
To switch on, press the button. The warning light below the button lights
up.
›
To switch off, press the button again. The warning light below the button
goes out.
Heating and manual air conditioning system
If the air distribution control is set to position when the recirculation modes
is switched on, the recirculated-air mode is switched off. By pressing the
button, the air recirculation also in this position can be switched on again.
When the cooling system (button ) is switched on and the temperature reg-
ulator is "turned" to the left, the recirculated-air mode is switched on.
Climatronic
The Climatronic can have a sensor that measures the air recirculation mode
and automatically turns on if there is an increased concentration of pollutants
in the incoming air.
When the pollutant concentration decreases to the normal level, the recircula-
ted air mode is automatically switched off.
Automatic switch-on/switch-off of the air recirculation function can be set in
the Infotainment screen, by pressing the button on the Climatronic and by
then pressing the function surface → Automatic air recirculation.
The air recirculation function is shut off by pressing the button; this may
be carried out automatically depending on the moisture conditions in the vehi-
cle interior.
WARNING
The air recirculation should not be left switched on for a long period of
time because then there is no supply of fresh air from the outside. "Stale
air" may result in fatigue in the driver and occupants, reduce attention lev-
els and also cause the windows to mist up. As soon as the windows mist up,
turn the air recirculation mode off immediately - there is a risk of accident!
Advertisement
Table of Contents
