Table of Contents
Advertisement
Fig. 282 Display in the instrument cluster: Examples of ACC status dis-
plays
Read and observe
on page 234 first.
The ACC makes it possible to set a speed of 30-160 or 30-210 km/h (depend-
ing on equipment fitted) as well as the distance to preceding vehicles.
The ACC can detect a vehicle that is up to approx. 120 m ahead using the radar
sensor.
ACC displays
» Fig. 281
Vehicle detected (control active)
1
Line showing the displacement of the distance when setting.
2
Setting the distance
Set distance to the vehicle ahead
3
Vehicle detected (control deactivated)
4
ACC status displays
» Fig. 282
Regulation is inactive (in the colour display the digits of speed limits is
shown in grey).
Regulation active - no vehicle detected (in the colour display the digits of
the speed limits are highlighted).
Regulation deactivated - no speed stored.
Regulation active - vehicle detected (in the colour display the digits of the
speed limits are highlighted).
Note to reduce speed
If the ACC's deceleration is insufficient in relation to the vehicle in front, the
warning light
lights up in the instrument cluster and the display shows a
message to engage the brake pedal.
Regulation according to the vehicle in the adjacent lane
During regulation your vehicle may be regulated according to the vehicle in the
adjacent lane.
This could occur at speeds above about 80 km/h when your vehicle is moving
faster than the vehicle in the adjacent lane on the driver's side. The display
shows the detected vehicle is in the adjacent lane.
Note
Some ACC notifications in the display of the instrument cluster may be hidden
by notifications for other functions. An ACC notification automatically appears
for a brief moment when there is a change in status of the ACC.
Automatic stopping and starting
Read and observe
Vehicles with an automatic transmission can decelerate to a standstill and
start moving again using the ACC.
Decelerate to a standstill
If a vehicle ahead decelerates to a standstill, the ACC will also decelerate your
vehicle to a standstill.
» page
237,
Starting to drive again after a holding period
As soon as the vehicle ahead starts moving again after a holding period, your
vehicle will also move and the speed will continue to be regulated. Control is
automatically disconnected in case of longer holding periods.
on page 234 first.
Assist systems
235
Advertisement
Table of Contents
