Table of Contents
Advertisement
Map alignment
The moved map can be centred/aligned to the vehicle, destination or route po-
sition.
›
To centre the map, tap on function surface
Options for map display in the split screen
Applies to vehicles with the Infotainment Columbus, without the digital instru-
ment cluster.
Fig. 225 Map in split screen
›
In the split screen, tap on function surface
Depending on the context, some of the following function surfaces will be dis-
played in area
.
B
Map display with the route from the current vehicle location to the desti-
nation
Change the map orientation
2D - Two-dimensional map display
Fig. 224
Map centring
» Fig.
224.
A
» Fig.
225.
A
3D - Three-dimensional map display
Switch on/off the automatic change of scale
Map display options in the digital instrument cluster
The ignition must be switched on for the map to be displayed in the digital in-
strument cluster.
Only applies to Infotainment Columbus
The map can be displayed in the digital instrument cluster and in infotainment
at the same time.
The type of map shown in the digital instrument cluster can be selected from
the main menu Navigation in the menu item → Map → Map view in instrum. clus-
ter:.
The map scale can be adjusted with the dial
wheel
» page
38,
Applies to Infotainment Amundsen
The map can be displayed in the digital instrument cluster or on the Infotain-
ment display.
▶
To change the display, tap on function surface
the main menu Navigation
The type of map shown in the digital instrument cluster is changed via the
main menu Navigation in the menu item
The map scale can be changed in one of the following ways.
With the function surfaces in Infotainment
▶
By turning the dial .
▶
▶
With the dial
A
on the multifunctional steering wheel
POIs display
The Infotainment system offers the possibility of displaying POI symbols on
the map on the Infotainment screen.
›
To activate/deactivate the display, go to the main Navigation menu and tap
on the function surface → POIs.
›
To select the POIs to be displayed, go to the main Navigation menu and tap
on the function surface → Map → Select categories for POIs and select the de-
sired categories (max. 10).
on the multifunction steering
A
» Fig. 204
on page 176 in
B
» page
185,
» page
38,
187
Navigation
Advertisement
Table of Contents
