About Linear Water Level - Toshiba AW-SD150SBA Service Manual

About Linear Water Level

When "Standard", "Soak" , "Memory","Heavy","Delicate" or "Softener" is set, the weight sensor automatically
sets the most suitable water level for the washing load on a linear basis to save water.
Setting is made based on the 4-levelled water level for manual setting. For example, when the detected
washing load is 5.0kg, the most suitable water level of 67.3L is automatically set by proportional calculation
between the first level of 82L for washing load of 7.0kg and the second level of 60L for washing load of
4.0kg. The display indicator for the lower water level, i.e., 60L for this example, turns on.
Manually set water level
1
105L
2
82L
3 60L
4
36L
Water level of 36L is very low as the blade of the pulsator is not fully covered with water. However, this water
level is suitable for washing the washing load of 1.0kg or below.
It is not an abnormal level.
One-Point Information
AW-SD156 7\SH
Water level
(L)
2
.

4.0
– 9 –
Washing load
1.0Kg
7.0Kg
4.0Kg
1.0Kg
5. .
Washing load
(KL)