About Concentrated Bubble Wash; Outline; How To Put Detergent; Washinging - Toshiba AW-SD150SBA Service Manual

About Concentrated Bubble Wash

1. Outline

Put the laundry in the basket and start the machine. The sensor will weigh clothes and begin flowing water.
The pulsator begins to revolve 6 seconds after startup under none-water situation, and clothes are
1
weighed.
2
)ORwing water starts. Put in detergent accorGLQJ WR WKH UHIHUHQFH YDOXH WKURXJK HQWU\ JDWH RI
"Washing Spinning Tub", followed by softening agent. Close the lid. Display of detergent amount.

■How to put detergent

Referring to the indicated detergent amount, put the
detergent into the detergent dispenser of the wash/spin tub.
Excessive detergent may lead to excessive suds or
insufficient rinsing.
If the water level is set to too low, some detergent may be
left in the dispenser.
In this case, put the detergent inside the wash/spin tub
around its peripheral.
There are 2 dispensers.
Choose more convenient one to put in the detergent.
• When changing the dispenser position
Turn on the power, set spin only while the lid is open, and then start the machine.
After "E21" is displayed, rotate the wash/spin tub manually to adjust the dispenser position. Then,
turn off the power.
3
The water level indicator will be lighted when flowing water ends by reaching the preset water level.
• When a chemical fiber, blending fiber or spreadsheet is washed, the water level may be a little bit low.
Adjust the water level by "WATER LEVEL" button.
Stirring during
flowing water
Stirring starts during flowing water while washing and flowing water are executed simultaneously.
Times of flowing water differ depending on FORWKHV ZHLJKW DQG ULQVLQJ IUHTXHQF\
One-Point Information

Washinging

Stirring during
flowing water
– 7 –
Stirring during
flowing water