About operation switching by clutch mechanism
1. About Clutch Mechanism
Switch washing operation and spinning operation by
a sliding clutch mechanism. The sliding clutch is
operated by pulling and pushing back the clutch lever.
1) When washing operation is performed, the teeth
on the top of the clutch fit into the teeth of the
lock gear on the upper part of the product
(on cup assy side). Fig.3
2) When spinning operation is performed, the
teeth on the bottom of the clutch fit into the teeth
of the boss on the lower part of the product
(on rotor side). Fig.2
Clutch
Fig.2 Clutch condition during spinning operation
4. Technical Points
One-Point Information
Lock gear
Rotor
Fig.3 Clutch condition during washing operation
– 5 –
Cup assy
Rotor
Switching lever
Lock gear Clutch
Fig.1 Clutch mechanism
Clutch
Clutch lever
Lock gear
Rotor