Unless otherwise specified, reassembling is to be performed in the reverse procedures of disassembling.
Part Name
Illustration
(8) EMC unit
(Photo 30)
(Photo 31)
Repair Procedures Description in
1
Open the control panel following the procedures
stated in
Cut the ORFN WLH following the procedures stated in
2
3
Remove EMC connector from Pc board assy.
4
Open the back cover following the procedures stated
in
(Photo 27)
5
3XVK RXW WZR lead clamps from the top cover.
(Photo 28)
6
Pull up the ferrite core.
(Photo 29)
7
Slide the EMC unit to the back side with pushing the
hook and pull up the EMC unit from the top cover.
8
Remove three connectors of the power cord from the
EMC unit.
– 4 –
1 6
~
in (1).
1
in (4).
1 3
~
in (5).
shows notes.
(Photo 27)
(Photo 28)
(Photo 29)
(Photo 30)
(Photo 31)