Water Flow Power - Toshiba AW-SD150UBPE Owner's Manual

Press button to choose the water flow power according to your needs such as what to be
washed or dirtiness level.
How to choose the water flow power
L
Key operation
Turn on the
power.
Press the
button once.
Press the
button twice.
Press the
button three times.
Press the
button four times.
L When you need to change the water flow power during operation
1
Press the
•
The water flow power will be gradually increased, and then be decreased. When you need to wash sensitive
clothes softly, hold the operation. Otherwise, such clothes may be damaged.
2
Press the
3
Press the
•
The water flow power will be changed during the operation when you select more than one levels of water.
6248122001_(02_11).indd 11 6248122001_(02_11).indd 11

WATER FLOW POWER

Display Situation
Standard water flow
(Default)
When you need to
wash rather strongly.
When you need to
wash strongly.
When you need to
wash softly.
When you need to
wash rather softly.
button to hold the operation.
button to choose the water flow power.
button again.
•
The water flow power during rinsing cannot be changed.
•
The water flow power can be adjusted only any of
"REGULAR" and "MEMORY" is selected.
•
Clothes should not be washed by strong water flow power.
•
When the "MEMORY" mode is set, the operation will start
with the water flow power preset.
•
When the water level reaches to a designated level, the
water flow power will be indicated. Such indication will be
repeated in the following order. This means the operation is
being done under the water flow power preset.
Example (Standard water flow power)
11
12/3/09 4:01:05 PM 12/3/09 4:01:05 PM