Wash Lid - Toshiba AW-SD150SBA Service Manual

Unless otherwise specified, reassembling is to be performed in the reverse procedures of disassembling.
Part Name Illustration

(11) Wash lid

(Photo 42)
(Photo 43)
Repair Procedures Description in
1
2
(Photo 40)
Note 1) Be careful not to break the hinge when
Note 2) Be careful of deformation of the lid spring
Carry out reassembling following the procedures
stated below.
• Attach the leg with the spring (red mark is located on)
(Photo 41)
the right side, blue mark on the left side viewing from the
front side of washing machine) to the wash lid arm.
•
And fit the another leg into the hook groove of the top
cover.
•
While the wash lid is open and then push the spring
into the groove of the top cover (right side and left side)
Make sure that the wash lid rotates smoothly. And no
mistake spring side.
– 5 –
Remove the back cover following the procedures
1 3
stated in ~ of (5).
While the wash lid is open, remove the hinge
which is located on the right side viewing from the
front side.
Inserting a screwdriver (-) between the top cover
hinge and the arm of the wash lid. While opening
the hinge, pull up the wash lid with your right hand
to remove it.
removing the wash lid.
which is attached to the arm (left side) of
the wash lid.
%OXH RI /VLGH
5HG RI 5VLGH
shows notes.
(Photo 40)
(Photo 41)
(Photo 42)
(Photo 43)