Table of Contents
Advertisement
Unless otherwise specified, reassembling is to be performed in the reverse procedures of disassembling.
Part Name
Illustration
(21) Spring
assembly
(Photo 7)
Repair Procedures Description in
1 Remove the top cover from the external case
following the procedures stated in of (17).
2 Remove the catch (2) from the external case
reinforcing plate. Remove the lifting rod from water tub
lifting part while holding the water tub with one hand.
(This can easily be done by pulling up the lifting rod
while holding up the water tub with one hand.)
Observe the followings when reassembling.
Note 1) Lifting rod is common for all 4 rods.
Note 2) Make sure to wind (counterclockwise) the air
tube 2 times around the lifting rod located on
the left viewing from the front side of the
washing machine. Failure to do so could
cause knocking sound or damage of the air
tube.
– 6 –
shows notes.
(Photo 7)
Hide quick links:
Advertisement
Table of Contents
