Serial Communication - Canon 4K600STZ User Manual

Menu Settings
Audio in terminal select
> [System settings] >
Select the terminal for audio input used with various input signals.
Submenu
DVI-1
DVI-2
DVI-3
DVI-4
HDMI-1
HDMI-2
DVI 1x2
DVI 2x2 / 1x4
HDMI 1x2

Serial communication

> [System settings] >
You can check setting values for the service port (CONTROL) used for serial
communication.
Option
Baud rate
Data bits
Parity
Stop bit
Power supply settings
> [System settings] >
Specify how power is managed at startup, in standby, and when no signal is
supplied.
[Audio in terminal select]
Select the terminal for audio input.
Option
Off No audio is output.
Use audio signals from AUDIO IN for audio
Audio in
output.
Only available when the submenu is [HDMI-1] or
HDMI-1 [HDMI 1x2]. Audio signals from HDMI-1 are
output.
Only available when the submenu is [HDMI-2] or
HDMI-2 [HDMI 1x2]. Audio signals from HDMI-2 are
output.
[Serial communication]
Modulation rate, in bits per second.
Number of bits of data.
Number of parity bits.
Stop bit length.
Option
1 Sets the stop bit length to 1.
2 Sets the stop bit length to 2.
[Power supply settings]
124
Function
Function
Function
Function