Table of Contents
Advertisement
Item
Date and
IPv4 SNTP
time
server IP address
IPv6 SNTP
server IP address
Summer
ON / OFF
time
Start point Month
Start point Week
Start point Day
Start point Time
Finish point
Month
Finish point
Week
Finish point Day
Finish point Time
Using the Projector on a Network
Explanation
Enter the IPv4 SNTP server
IP address in 1-byte numbers.
Enter the IPv6 SNTP server
IP address in 1-byte numbers.
Select whether to turn the
summer time function on or
off (Time adjustment one hour
ahead at the beginning of
daylight saving time and one
hour back at the end).
Choosing OFF will prevent
you from configuring the
following settings.
[Start point Month]
[Start point Week]
[Start point Day]
[Start point Time]
[Finish point Month]
[Finish point Week]
[Finish point Day]
[Finish point Time]
Select the month when
daylight saving time begins.
Select the week when
daylight saving time beings.
Select the day when daylight
saving time begins.
Enter the starting time for
daylight saving time in 1-byte
numbers, in the range 00:00
to 23:59.
Select the month when
daylight saving time ends.
Select the week when
daylight saving time ends.
Select the day when daylight
saving time ends.
Enter the ending time for
daylight saving time in 1-byte
numbers, in the range 00:00
to 23:59.
165
Factory default setting
0.0.0.0
<Blank>
OFF
1
1
Mon
00:00
1
1
Mon
00:00
Advertisement
Table of Contents
