Step 7 Turn The Projector Off - Canon 4K600STZ User Manual

Step 7 Turn the Projector Off

1
Press the POWER button to display the window shown below.
Remote control
2
When this window is displayed, press the POWER button again to turn off
the power.
After you turn the projector off, projection stops, the [STAND BY] indicator
flashes in red, and the projector starts cooling down. After cooling down, the
projector enters standby mode. In standby mode, the [STAND BY] indicator
remains lit instead of flashing.
If you want to continue projecting without turning off the power, press a button
other than POWER, or else wait until the confirmation message disappears.
• The projector cannot be turned on while cooling down.
• Using the projector for extended periods may shorten the life of the internal optical
components.
• Unplug the projector if it will not be used for an extended period.
Projector
71
Projection Procedure