Using the Projector on a Network
Setting a Scheduling [Schedule]
From [Schedule] in the settings screen, you can automate some projector tasks by
scheduling them. As the timing of scheduled operation, choose from [Usually],
which is not during a certain period, or one of five special period times (Period.1 –
Period.5) that you set up. For the setting procedure, refer to "Network Setting"
(P161).
Item
Schedule
Select period
view
Time setting
Usually
Explanation
Select a specific period to
configure.
In the left box, enter the
starting date of the specific
period you are scheduling,
and in the right box, enter the
ending date, using 1-byte
numbers.
Dates of periods cannot be
set to overlap.
Shows the usual schedule,
which can be turned on or off
by selecting the check boxes.
166
Factory default setting
Period.1
2017/01/01
Cleared (OFF)