Canon 4K600STZ User Manual page 106

Menu Settings
Brightness level
> [Image adjustment] >
Control the laser diode to adjust the projection brightness.
Use the [ ] / [ ] buttons to adjust the brightness.
[Brightness level] appears instead of [Light source mode] when the operating mode
(P112) is not set to [Normal].
Reset
> [Image adjustment] >
Restore the current image quality settings to defaults.
Option
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 3] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
• The following settings are reset (initialized).
• Brightness
• Gamma
• Color balance
• R/G/B Offset
• MPEG noise reduction
• Colorimetry
• 6-axis color adjust
(Hue/Saturation/
Brightness)
• Brightness level
[Brightness level]
[Reset]
• Contrast
• HDR range
• Color temperature
• Ambient light (Type/
Level)
• Dynamic gamma
• HDR
• Fine-Tune Gamma
(White/Red/Green/Blue)
106
Function
• Sharpness
• Color level
• R/G/B Gain
• Random noise
reduction
• Dynamic contrast
• Mem. color correct
• Light source mode