Extron Xtp; Serial Communication - Canon WUX7500 User Manual

Menu Description
HDBaseT signal quality
> [System settings] >
Display the video signal quality of HDBaseT input. The HDBaseT input signal value
received is indicated by a white line.
High Indicated by the green portion. This is the recommended level.
Middle Indicated by the yellow portion. The signal is fluctuating. Check the cable.
Indicated by the red portion. The signal cannot be used. Fix the cable connection
Low
or replace the cable.
Do not coil or bundle cables.

Extron XTP

> [System settings] >
Specify whether to connect to Extron XTP transmitters when connected via
HDBaseT.
Submenu
Off
On

Serial communication

> [System settings] >
Select ports used for serial communication. Otherwise, you can refer to this setting
to check setting values for the port selected for serial communication.
Submenu
Service port
HDBaseT
Detail
[HDBaseT signal quality]
[Extron XTP]
Do not connect to XTP devices.
Connect to XTP devices.
[Serial communication]
Use the service port (CONTROL).
Use the HDBaseT port.
Option
Baud rate Modulation rate, in bits per second.
Data bits Number of bits of data.
Parity Number of parity bits.
Length of mark representing the end of data
Stop bit
bits. Select 1 or 2.
161
Function
Function
Function