Menu Settings
Menu
Detailed IPv4
address settings
IPv6
Submenu
Change or specify the IP address, subnet mask, and
gateway address used for connections.
Menu screen for 4K600STZ/4K600Z
(For 4K601STZ/4K601Z, "(wired)" is not shown in the
TCP/IP
menu title.)
settings
• This menu is not available (grayed out)
• If an invalid value is entered, "Invalid entry."
• When [Network (wired/wireless)] is set to
Option
Off
Disables the projector's wired LAN (IPv6) function.
Enables the projector's wired LAN (IPv6) function.
On
[Detailed IPv6 address settings] is now available.
144
Function
Function
when [DHCP] (P143) is [On].
is displayed. In this case, enter a valid
value.
[On/On (Pj AP)], "Cannot set identical
segment IP" is displayed if you specify the
same subnetwork as in PJ AP mode. Enter
a different subnetwork, or change [Network
(wired/wireless)] to [On/Off] before entering
the wired IP address again. (4K600STZ/
4K600Z)
Function