Communication System (Serial); Communication System (Lan); Command Format - Canon WUX6000 User Commands

Communication System (Serial)

Item
Communication system
Transmission speed
Character length
Stop bit
Parity

Command format

Maximum transmission
length
Delimiters
Command code
Communication procedure
Flow control
Error control
Break signal
Timeout
* For timeout, see chapter 3, "Communication Flow" on page 8.

Communication System (LAN)

Item
Communication system
Remark
Command Format
Format
Commands are sent from PC to the projector in the following format:
<command text><delimiter>
<command text>=(value>(delimiter>
<command text>
<value>
<delimiter>
For <command strings> and <value>, see explanation about each command.
Example) When checking the power status (POWER)
PC to PJ
G E T
47h 45h 54h
RS-232-C Start-stop synchronization half-duplex communication
19.2 Kbps
8 bits / character
2 bits
None
Variable-length records with terminals as delimiters
Maximum of 256 characters (bytes) including delimiters.
CR (0Dh) can be used as a delimiter.
Delimiter in the response is CR.
ASCII codes (20h to 7Eh)
Codes other than ASCII codes (20h to 7Eh), delimiter code (0Dh), or NUL (00h) are
handled as spaces (20h).
No procedure
None
None
Not supported
Tc Between characters:
Between command /
Tr
response interval:
TCP/IP connection. Port: 33336
If a command is not received for 30 seconds, the socket will be closed.
or
Character strings consisting of 1 or more alphanumeric letters
Character strings consisting of 1 or more alphanumeric letters
CR(0Dh)
= P O W
3Dh 50h 4Fh 57h 45h
-4-
Specifications
1 s
15 s
Specifications
E R CR
52h 0Dh
WUX6000 User Commands