Canon 4K600STZ User Manual page 15

Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not install the projector in a location that is damp or dusty, or where there
is a lot of oily smoke or steam.
• Make sure to implement anti-fall measures such as an anti-fall wire when
installing the projector in high places, for example, installing it on the ceiling.
• Do not look directly into the exhaust vents during use.
• Do not insert any object into vents in the projector, such as the air intake vent
or exhaust vents.
• Do not place a pressurized can in front of the exhaust vents. The pressure of
the contents of the can may increase due to heat from the exhaust vents and
this could result in an explosion.
• When cleaning off dust or dirt from projector parts such as the lens or filter,
never use any spray that is flammable. Internal parts that become hot may
ignite and cause a fire.
• Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector.
• As strong light beams are emitted while the
projector is in use, do not look directly into the
projector lens. Doing so could cause an eye
injury. Pay particular attention to prevent
small children from doing so.
• Light from the projector is classified as Risk Group 2 (RG2) according to
IEC 62471-5:2015.
• If children may approach the projector or touch it, always ensure the
projector is used under adult supervision.
• Do not hold or install optical instruments (such as magnifying glasses,
reflectors, or glasses) in the path of light from the projector. If projected light
is refracted or reflected and enters people's eyes, it may result in eye injury.
• Do not lift the projector alone. Have at least one assistant.
• When setting the projector on a high surface for projection, be sure the
surface is flat and stable.
• Do not use the projector on a soft surface such as carpet or sponge mat, etc.
• For ceiling mounting or other installation work, request service from a
qualified technician or the Canon Customer Support Center. Poor installation
work could result in an accident.
15
Safety Instructions