Serial Communication - Canon WUX500 User Manual

Menu Description
HDBaseT
Enable or disable HDBaseT input. For details on HDBaseT connections, see "Connection
Procedure" (P44, P45).
Option
Off
On
Image signal
quality
Do not coil or bundle cables.

Serial communication

Select the port used for serial communication. Otherwise, you can refer to this setting to
check setting values for the selected port.
Option
Service port
HDBaseT
Detail
Only [Service port] is available when [HDBaseT] (P96) is set to [Off].
Disable HDBaseT.
Enable HDBaseT.
The HDBaseT input signal value received is indicated by a white line.
Indicated by the green portion. This is the recommended
High
level.
Indicated by the yellow portion. The signal is fluctuating.
Middle
Check the cable.
Indicated by the red portion. The signal cannot be used. Fix
Low
the cable connection or replace the cable.
Use the RS-232C port (service port).
Use the HDBaseT serial port.
Display setting values for the selected serial communication.
Stop bit Length of mark representing the end of data bits.
Baud rate Modulation rate, in bits per second.
Data bits Number of bits of data.
Parity Number of parity bits.
Function
Function
96