Setting Up The Network; Displaying The Network Configuration Screen - Canon 4K600STZ User Manual

Using the Projector on a Network

Setting Up the Network

4K600STZ screenshots are used in these instructions.

■ Displaying the Network Configuration Screen

1
Turn on the computer and projector.
Network functions are not available for the first 40 seconds after projector startup.
2
Launch a web browser, enter "http://(projector IP address)" in the
address bar, and press the Enter key.
The projector web screen appears.
The following information is displayed.
Projector control
Settings
Projector name
Comment
MAC address (Wired)
4K600STZ/4K600Z
MAC address
4K601STZ/4K601Z
IP address (Wired)
4K600STZ/4K600Z
IP address
4K601STZ/4K601Z
MAC address (Wireless)
4K600STZ/4K600Z
IP address (Wireless)
4K600STZ/4K600Z
Power status
Filter time
Alert
Displays the projector control screen.
Shows the settings screen.
The name of the projector on the network
Relevant notes, such as where the projector is installed
MAC address of the wired LAN
IP address of the wired LAN (IPv4)
MAC address of the wireless LAN
IP address of the wireless LAN (IPv4)
The power status of the projector
Air filter operating time
Error message (if an error has occurred)
Temperature abnormality
Faulty light
Faulty air filter unit
Faulty cooling fan
Faulty power supply
160