Led Indicator Displays - Canon 4K600STZ User Manual

■ LED Indicator Displays

Projector operating status is indicated by five LEDs, as shown in the following table.
For details on warnings, see "LED Indicator Details" (P208).
Example of when the POWER indicator is on;
LED indicator
POWER STAND BY
(green) (red)
WARNING LIGHT
(red) (orange)
31
: Off : Lit : Flashing
Operating status
TEMP
(red)
Projector not plugged in.
In standby mode.
Resuming operation (projection) after
standby.
Cooling down while entering standby
or power management mode from
power on.
Power is on. (Projecting.)
In power management mode, with the
light source off. (Flashes green and
then red.)
Internal temperature is high. (In
standby mode.)
Internal temperature is high. (During
projection)
An error has occurred with the light
source unit.
A temperature error has occurred.
Flashes 3 times: An air filter error has
occurred.
Flashes 4 times: A fan error has
occurred.
Flashes 5 times: A power error has
occurred.
Before Use