Installation Procedure; Setting Up The Projector; Positioning The Projector In Front Of The Screen; Floor Installation - Canon 4K600STZ User Manual

Installation Procedure

Before setting up the projector, be sure to read "Before Installation" (P21).

Setting Up the Projector

■ Positioning the Projector in Front of the Screen

Place the projector in front of the screen.
• To avoid keystone distortion, install the
projector so that it is at right angles to the
screen.
• The screen must not be exposed to direct
sunlight or light from lighting equipment.
In a bright room, it is recommended that
lights be turned off, curtains be drawn,
and other steps taken to make the screen
easier to see.
• Colors may appear distorted when
images are viewed from the side on
some screens. For best results, use a
matte screen with a wide viewing angle.

■ Floor Installation

To adjust the projection position when the projector is installed on the floor, use the
lens shift function (P43, P62) to adjust the image up / down / left / right.
For information about the relationship between image size and projection distance,
refer to page 40.
Lens shift
38
Screen
Optical axis