Using the Projector on a Network
Basic Wireless Network Settings [Wireless] (4K600STZ/4K600Z)
From [Wireless] on the settings screen, you can complete basic network
information for wireless connections. For the setting procedure, refer to "Network
Setting" (P161).
Item
MAC address
IPv4
DHCP
address
IP address
Subnet mask
Default gateway
Explanation
Shows the projector's
wireless MAC address.
Select whether to turn the
DHCP function on or off for
wireless LAN (IPv4). The
following settings cannot be
configured manually when
this setting is [ON], because
the IP address is acquired
from the DHCP server.
[IP address]
[Subnet mask]
[Default gateway]
Enter the projector's wireless
LAN (IPv4) IP address in 1-
byte numbers.
Enter the wireless LAN (IPv4)
subnet mask in 1-byte
numbers.
Enter the wireless LAN (IPv4)
default gateway address in 1-
byte numbers.
172
Factory default setting
The projector's wireless MAC
address
OFF
192.168.253.254
255.255.255.0
0.0.0.0