Check The Ribbon Remaining; View The Ribbon Status - Rimage Everest Encore User Manual

Set your Printing Preferences
b. View or change the Color Density Settings.
Select the Modify button from the Color Density Settings pane.
i.
The Color Density Settings window opens.
ii. Select the desired Cyan, Magenta and Yellow settings to modify
the color density.
iii. Select the desired Black setting to modify the density for
monochrome images.
iv. Select OK to save your changes. The Color Density Settings
window closes.
5. Select Close to close the Status Monitor dialog box.
6. Select OK to close the Rimage Everest Encore Printing Preferences
window.

Check the Ribbon Remaining

The operator panel on Rimage Producer V and Catalyst autoloaders displays
the estimated number of prints remaining on the print ribbon and the
retransfer ribbon.
For standalone Everest Encore printers and AutoPrinters, you can check the
amount of ribbon remaining using the Status feature of the printer driver.
Use the following procedure to check the amount of ribbon remaining for a
standalone Everest Encore printer or AutoEverest AutoPrinter.

View the Ribbon Status

The Status tab of the Status Monitor window for Windows allows you to
view the estimated percentage and number of prints remaining on the print
and retransfer ribbons.
1. Access Printing Preferences. Refer to page 12 for instructions.
2. Select the Utility tab.
3. Select Status Monitor... The Status Monitor window opens, with the
Status tab active.
2004001_A
4. View the ribbon information:
•
•
Tip: If you remove a ribbon from the Everest Encore printer and reinsert it,
the system recognizes the amount of ribbon remaining in the consumable
monitoring application. Partially used ribbons from other Everest printers
will not display accurately in the consumable monitoring application.
5. Reset the estimate for the number of prints remaining on the retransfer
ribbon.
a. Select Options. The Reset retransfer prints remaining window
b. If you are using a 500-print ribbon, check the Use 500 print
c. Select Reset prints. The Reset prints window opens.
d. Select Yes to confirm the reset. The Reset prints and Reset retransfer
e. Select Close to close the Status Monitor window.
f.
For more information visit www.rimage.com/support
Current printer status.
Estimated percentage and number of prints remaining on the print and
retransfer ribbons.
opens.
retransfer ribbon box.
prints remaining windows close.
Select OK to close the Printing Preferences window.
15