Identifying the Parts of the Everest Printer
Switches
There are two switches on the rear of the Everest Encore: the AC voltages
switch and the mode switch.
AC Voltage Switch
The AC voltage switch is used to select the AC voltage of the power outlet.
This switch has two positions: 110V and 220V.
ȸ
Warning! Set the AC voltage switch to match the voltage of the AC
power outlet.
2004001_A
Mode Switch
AC Voltage Switch
For more information visit
www.rimage.com/support
Mode Switch
Important! You must power off the printer before changing the mode.
Power the printer on when the mode switch is set.
The mode switch is a rotary switch used to set the operational mode of the
Everest Encore. The opening at the base of the cap on the switch indicates
the selected mode. When the printer is shipped, it is set to the correct mode
for your operation. You should not have to change the switch position unless
you perform diagnostic tests.
Switch Position
Use
0
Standalone printer
2
Rimage autoloader or AutoPrinter
3
Diagnostic testing
All others
Not used
10