Adjust The Print Alignment And Color Density; Check The Ribbon Remaining - Rimage Professional 3400 User Manual

c. To modify only Standard Area setti ngs, select the Standard radio butt on.
i. Enter the desired Outer Diameter.
ii. Enter the desired Inner Diameter.
d. To print on a disc with a stacking ring, select the Advanced radio butt on. The Hub Area setti ngs display.
i. Enter the desired Outer Diameter for the hub.
ii. Enter the desired Inner Diameter for the hub.
e. Select OK to save the changes. The Printable Area Setti ngs window closes.
4. When you have made the desired choices in the Rimage Everest 400 Printi ng Preferences window, select Apply.
5. Select OK to close the Rimage Everest 400 Printi ng Preferences window. Adjust the Print Alignment and
Color Density.

Adjust the Print Alignment and Color Density

1. Access printi ng preferences. Refer to page 23 for instructi ons.
2. Select the Uti lity tab.
3. Select Status Monitor... butt on. The Rimage Everest 400 Status Monitor window opens with the Status tab acti ve.

Tip: On the Status tab, you can view the progress of a print job, the type of print ribbon installed, and the
esti mated percentages of unused ribbon for the print and retransfer ribbons.
4. Select the Printer Informati on tab to view or change the Print Alignment and Color Density setti ngs, or view the Everest
400 Printer Status.

Tip: The Printer Informati on tab also displays the current fi rmware version and serial number of your Everest 400
printer.
a. View or change the Print Alignment Setti ngs.
i. From the Print Alignment Setti ngs pane, select the Modify butt on. The Print Alignment Setti ngs dialog opens.
ii. Select the desired Color/Monochrome setti ng to modify the horizontal alignment for all ribbon types.
iii. Select the desired Color setti ng to modify the verti cal alignment for prints with a CMY ribbon.
iv. Select the desired Monochrome setti ng to modify the verti cal alignment for prints with a monochrome ribbon.
v. Select OK to save the changes. The Print Alignment Setti ngs window closes.
b. View or change the Color Density Setti ngs.
i. From the Color Density Setti ngs pane, select the Modify butt on. The Color Density Setti ngs dialog opens.
ii. Select the desired Cyan, Magenta and Yellow setti ngs to modify the color density.
iii. Select the desired Black setti ng to modify the density for monochrome images.
iv. Select OK to save your changes. The Color Density Setti ngs window closes.
5. Select Close to close the Status Monitor dialog box.
6. Select OK to close the Rimage Everest 400 Printi ng Preferences window.

Check the Ribbon Remaining

The operator panel on the front of the 3400 and 5400N displays the esti mated number of prints remaining on the print
ribbon and the retransfer ribbon.
2001431_A 25