Rimage Everest Encore User Manual page 20

Maintaining the Everest Encore Printer
2. Access the print ribbon.
Print Ribbon
Carrier
a. Open latch 1.
b. Pull the print ribbon carrier straight out of the printer.
c. Lay the print ribbon carrier on its back.
2001474_A
Tip: Perform cleaning procedures while the print ribbon is removed. For
more information refer to the
Latch 1
page 20.
3. Remove the print ribbon from the carrier.
For more information visit rimage.com/support
Clean the Everest Encore Printer
Supply Roll
a. Slide the supply roll to the left.
b. Slide the take-up roll to the right.
c. Discard the used print ribbon.
section on
Take-up Roll
17