Clean The Side Air Filters - Rimage Everest Encore User Manual

Maintaining the Everest Encore Printer Maintaining the Everest 600 Printer

Clean the Side Air Filters

Tool Required: Torx T10 screwdriver
#
1. Open the side cover.
a. Press the two side cover latches to release the side cover.
Side Cover
b. Lower the side cover and the attached fan cover.
2. Remove the fan cover from the side cover.
a. Remove the Torx T10 screws (Qty. 4) from the inside of the side
cover.
b. Close the side cover. The fan cover remains on the work surface,
with air filters exposed.
Tip: If the fan cover remains attached to the side cover, gently lower
the fan cover.
2004001_A
3. Remove the three air filters from the fan cover.
4. Clean the air filters.
a. Hold each air filter under running water.
b. Allow the air filters to dry.
For more information visit www.rimage.com/support
Air Filters
Fan Cover
23