Set Your Printing Preferences; Default Printable Area Settings; Access Printing Preferences; Access Printing Preferences Through The Windows Start Menu - Rimage Everest Encore User Manual

Set your Printing Preferences

This section provides the information needed to set up your printing
preferences and check the amount of print and retransfer ribbon remaining
using a Windows PC.

Default Printable Area Settings

Most discs have the following printable areas:
Disc without stacking ring:
Outer Diameter 118 mm
•
Inner Diameter 24 mm
•
Set Your Printing Preferences
Printing preferences allow you to set up your Everest Encore printer to
produce the best possible labels on your discs.
Important: Unless otherwise indicated, all Windows navigation statements
are Windows 10 paths. Other Windows operating systems' navigation may
differ slightly.
2004001_A
Disc with stacking ring:
Standard Area:
Outer Diameter 118 mm
•
Inner Diameter 38 mm
•
Hub Area:
Outer Diameter 35 mm
•
Inner Diameter 17 mm
•
For more information visit

Access Printing Preferences

Use one of the procedures below to access the Everest Encore Printing
Preferences.

Access Printing Preferences through the Windows Start Menu

Using this method, printing preferences are saved in the printer driver
settings and are applied to all newly created labels.
1. Select: Start > Devices and Printers.
2. Right-click the Everest Encore printer. The dropdown menu displays.
3. Select Printing Preferences. The Rimage Everest Encore Printing
Preferences dialog box opens.

Access Printing Preferences through CD Designer

Using this method, printing preferences are saved with the label file and are
used instead of the printer driver settings.
1. Open the desired label file in CD Designer.
2. From the File menu, select Print. The Print window opens.
3. From the Name dropdown list, select the Everest Encore printer.
4. Select the Document Properties button. The Rimage Everest Encore
Properties dialog box opens.
www.rimage.com/support 12