Managing The Apartment List - golmar Nexa Modular GB2 User Manual

G 2 AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL B
PROGRAMMING THE DOOR PANEL

Managing the apartment list:

It is possible to display a contacts list on the EL3422/GB2 TFT screen module, selected using the selection keys on the
N3401/GB2 module, and make a call by pressing the bell button on the same module.
The apartment list can be created using the 'Address Manager GB2' program, available for download from
https://doc.golmar.es. By means of 'Address Manager GB2', it is also possible to reassign the terminal to which buttons
1 and 2 of the EL632/GB2A module and the buttons of the EL610D modules, if any, make the call.
Generating a contacts list:
Press the 'New
(Step 1)
can be one building or several with similar characteristics, an area with a general panel and several
buildings inside or even an entire block of buildings independent of each other. That way, the scope of the
definition of the project can be decided by the designer of the project.
Once the project information has been completed, click the 'Save' button located next to the 'New
(Step 2)
button.
Create a new door panel by clicking on the
(Step 3)
header, and indicate all of the information concerning the door panel, as well as the door panel operating
mode (see pp. 7 and 8) and the number of EL610D modules that it has (0 in the case of a coded panel).
Once the configuration of the door panel is finished, press
appears in the project's door panel table and is accessible to create new contacts.
site ' button to create a new project indicating the information related to the installation. This
button located below the fields of the project
'New entry panel'
to save the new information. It then
' Save '
30
site '
Continued overleaf