golmar Nexa Modular GB2 User Manual page 22

G 2 AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL B
PROGRAMMING THE DOOR PANEL
Programming fields:
Continued from previous page
Field '11': Volume of the sound module speaker in communication.
Enables the setting of the speaker volume of the sound module in communication.
Steps: Field + bell (N3301/GB2) + sound module volume level + bell (N3301/GB2).
(Step 1)
(Step 2)
...
(Step 3)
0
(Step 4)
(Step 5)
12
Field '12': Sets the vocal synthesis volume.
Enables the setting of the vocal synthesis volume by selecting between 0 and 9.
Steps: Field + bell (N3301/GB2) + vocal synthesis volume + bell (N3301/GB2).
(Step 1)
(Step 2)
...
(Step 3)
0
(Step 4)
(Step 5)
13
11
Press '11' to select field '11'
11
Press the bell button (N3301/GB2) to confirm the selection of the field.
Set the sound module speaker volume for when communication is established with a
9
telephone or monitor using the numeric buttons from 0 to 9.
The factory setting is 5.
Press the bell button (N3301/GB2) to finish programming the field.
Then press the number of the next field to configure or press the C button (cancel) to
C
or
exit programming mode.
12
Press '12' to select field '12'.
12
Press the bell button (N3301/GB2) to confirm the selection of the field.
Define the vocal synthesis volume using the numeric buttons between 0 and 9, where 0 is
9
the lowest volume and 9 is the highest.
The factory setting is 5.
Press the bell button (N3301/GB2) to finish programming the field.
Then press the number of the next field to configure or press the C button (cancel) to
C
or
exit programming mode.
...
0 9
...
0 9
22
Continued overleaf