Modem Connection Configuration - EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual

2.2

Modem Connection Configuration

NOTE: This type of connection should only be done after experience with a direct RS232
connection
This screen capture shows how Hyperterm should be configured to make a remote
modem connection. Replace the '709' number with the required phone number. The
'....5.0005' is required to establish a modem connection.
Making a connection
Once the connection information is configured and saved you can double click the
Icon/File and a window will open allowing you to initiate dialling to the pre-configured
site.
When a connection to the EDAC700 RTU is established via a modem connection, the
PIN to put the product into Program-Mode is not required. The EDAC700 RTU will go
into Program Mode automatically.
Date: 31/10/12 Page 7File: 700b Technical Manual ver1.9.3.docm