Configure System Settings - EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual

5.7

Configure System Settings

This Menu is where the user can setup default values for security and operational
options of the dialler.
Program Mode -> Configure Dialler -> Configure System
This sets the number of telephone rings the EDAC700 RTU will count before answering
an incoming call when in the Normal state.
This sets the number of telephone rings the EDAC700 RTU will count before answering
an incoming call in the Wait state. This is when the dialler is in Run mode and there are
alarms triggered.
This sets the number of telephone rings the EDAC700 RTU will count before answering
an incoming call when cancelled alarms exist.
This sets the method for cancelling an alarm when answering an incoming call.
Not allowed
*Any key (default)
Group Pin
This sets the security number (PIN) used to access Program Mode from Run mode.
Date: 31/10/12 Page 41File: 700b Technical Manual ver1.9.3.docm