Configure Speech (Speech Menu) - EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual

5.8

Configure Speech (Speech Menu)

This Menu lets the user configure the default speech records for the EDAC700 RTU.
Program Mode -> Configure Dialler -> Configure Speech
Selecting this option allows the user to listen to the site message (if it exists) or record
the site message. The site message usually contains the company name or the site
location.
Several messages are displayed while the RTU prepares to record. Wait for the
EDAC700 RTU to beep before you start your recording.
Press any key when you are finished recording. The EDAC700 RTU will play your
recording back to you. Press <Ok> to stop listening to the recording playback, then
<Ok> to move to the next setting.
Note! A System PIN protects selection of this option. This is only available to EDAC
Accredited Service Centres. Please contact your local EDAC representative for further
information.
Date: 31/10/12 Page 44File: 700b Technical Manual ver1.9.3.docm