EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual page 51


Up to 300 seconds of System and User Recordable Voice Messages

20 second voice messages per input and group (default 20 seconds can be
extended)

40 digit alpha-numeric or numeric pager message per input or group
Groups

1 to 20 inputs per group

1 to 9 outputs per group

1 group name message per group

groups can be either input or output but not both
Call Lists

1 to 20 telephone numbers per call list
Time Frames

choice of timeframe (day/night)
Rosters

unlimited rosters

only one active roster at a time
Programmable Parameters

Up to 20 telephone or pager numbers per call list.

One alphanumeric pager and SMS message per physical input and I/O group.

Up to 40 digits for telephone or pager number.

Reporting and System Messages

4 digit security PIN numbers

Groups, Call Lists, Rosters, Time Frames
Optional Expansion Unit
The 32-bit Pulse/RunMeter Unit is an optional extra for the EDAC 700. This unit features
8 Pulse Accumulator Inputs and 8 Run-Time Meter Inputs or alternatively an additional
20 digital Inputs.
The unit fits inside the EDAC 700 Case and derives its power supply from the EDAC
700.
When configured for Pulse/RunMeter Inputs it will give reports, but will not generate
alarms.
When configured as Digital Inputs, the EDAC 700 will generate alarm notification calls

Input Voltage Range: 0-20V

Input Trigger Voltage: 0V

Power Supply: 12V (derived from the EDAC 700)

Current Consumption: 30mA

8 Pulse Accumulator Inputs:
− Input Frequency: 5kHz
− Maximum Count: 4294967296

8 Run-Time Meter Inputs:
− Resolution: 0.1 Hour
Date: 31/10/12 Page 51File: 700b Technical Manual ver1.9.3.docm