Table of Contents
Advertisement
5.5
Configure Rosters (Roster Menu)
If no Rosters are defined the EDAC700 RTU will default to using Call List 1. A Roster
must have at least one Call List or a number of Call Lists mapped to it. Once one or
more Rosters have been configured the operator can change the current Roster either
via the menu options using a touch-tone phone or the EDAC700 RTU keypad.
Program Mode -> Configure Dialler -> Configure Rosters
The "Roster" menu includes Add & Delete roster options.
As you define new Rosters using Add a roster, they are added to the list in this menu.
You can modify any existing entry by pressing <Ok> when its name is displayed.
You can give the roster a meaningful name, or leave the default name.
This setting links a Call List to this roster. The display is indicating that Call List 1 is
connected to Group 1, so if Group 1 is triggered it will use Call List 1 to make alarm
notification calls from.
Use the arrow keys to scroll through the list. The dialler will give a double beep on the
last Call List entry.
The next setting determines which Call List is used during the default time frame.
Press <OK> to save and exit, or press <Esc> to discard any changes.
Date: 31/10/12
Page 39File: 700b Technical Manual ver1.9.3.docm
Hide quick links:
Advertisement
Table of Contents
