EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual page 33

Press any key when you are finished recording. The EDAC700 RTU will play your
recording back to you. Press <Ok> to stop listening to the recording playback, then
<Ok> to move to the next setting.
Enter a Group PIN. Each Group has a 4-digit PIN number associated with it. On an
alarm notification call the number is entered using a touch-tone phone to acknowledge
and cancel the alarm. A single PIN can be used for all Groups or each Group can have
its own individual PIN.
This setting allows you to choose either an Input (Default) or an Output Group type. You
cannot map Inputs and Outputs to the same Group. In order to turn an Output on it must
be associated with an Output Group.
Output Groups are limited to 9 Outputs. The number of keys available on a normal
touch-tone phone determines this. The keys, numbers 1 to 9, are used to toggle the
outputs on and off during a phone call with the EDAC700 RTU.
Press <OK> to save and exit, or press <Esc> to discard any changes.
Date: 31/10/12 Page 33File: 700b Technical Manual ver1.9.3.docm