Hyperterm And The Edac700 Rtu; Direct Rs232 Connection Configuration - EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual

2

Hyperterm and the EDAC700 RTU

Microsoft provides Hyperterm free with all Windows operating systems from Win95 on.
If it is not installed you can normally find it on the Windows distribution disk.
Once your terminal program is connected to the EDAC700 RTU and the RTU is in
Program Mode, the complete menu is displayed on the PC screen with a letter for each
option. Typing each letter selects the corresponding option.
2.1

Direct RS232 Connection Configuration

This screen capture shows how Hyperterm should be configured to make a direct
connection via Com1 and RS232 lead.
This next screen capture shows the settings form for the Communications Port that is
displayed when you click on Configure. Enter all the values as they are listed here.
Date: 31/10/12 Page 5File: 700b Technical Manual ver1.9.3.docm
Use drop down
arrow to select
comm port
Use Configure
Button to get to
next screen