Table of Contents
Advertisement
5.1
Configure I/O (I/O Menu)
All settings, calibration and voice messages relating to the sensor-input and digital
output configuration, including Pulse and Runtime Meters, are done in this menu.
5.1.1
Common Settings
Program Mode -> Configure Dialler -> Configure I/O
The " Configure I/O " menu includes Add & Delete I/O options, and at least three pre-
configured Inputs:
253-1 RTU Batt
254-1 RTU Power
1-1 Input 1
As you define new Inputs using Add I/O, they are added to the list in this menu. You can
modify any existing entry by pressing <Ok> when its name is displayed.
The first setting displayed is the Physical I/O Point number this Input uses. This will be a
number between 1 and 20 (unless you have an expansion option). You do not have to
use consecutive numbers although it is recommended for simplicity.
Date: 31/10/12
Battery back up reading
RTU Power supply voltage
Example input configuration
Page 24File: 700b Technical Manual ver1.9.3.docm
Hide quick links:
Advertisement
Table of Contents
